Description
UltraSonic Nebulizer WH2000
Ultrasonic nebulizer series manufactured by SMARTCARE. The product is reasonable in design, good in fog, quality high in flexibility, small in size and the excellent in profitability. it is even more suitable for hospital and family uses. it’s very convenient to use.
Ultrasonic. It can also be used for interior humidification well as family.
Product Detail
|
|
|
---|---|---|
For Adult and Pediatric UseThe buoy in water trough must not be lost. If the buoy is dismantled, install it back according to the original orientation, otherwise the instrument can not work normally When changing the crystal, only turn the nut to loosen or to tighten a screw on the crystal holder instead of turning the head of screw. Make sure that the crystal holder connects with engine tightly, for avoiding leakage of water through the rubber seals, which will damage the instrument. |
Two MasksPlease sterilize the parts with 75% alcohol. Do not sterilize in high temperature environment. During use, the fan blades easily tainted with dust, which should be cleaned regularly. |
Low NoisePlease store the instrument in a dry and ventilated place when not in use for a long time. For avoiding the risk of infection and keep normal fog volume, please clean the water trough and wipe the crystal in time after each use. |
OPERATIONS
- Turn the timer knob on panel to the -off position and the fog volume knob to the “min’ position.
- Turn the clamps on the cup pedestal and remove cup cover and pedestal, then add distilled water into the water trough until it reaches water lever mark.
- Install the medicinal cup pedestal on the water trough and make sure the fixed position is correct. The medicinal cup should be placed inside the pedestal, then add proper aqueous drug into the cup. Cover the cup and turn the clamps to the fix it
- Connect bellows as well as spray nozzle or mask with fog outlet of the cover.Turn the timer knob to the required time and press the power switch to start the instrument. At the same time, the indicator light illuminates. Adjust the fog volume by turning the knob clockwise until the flow rate meets patients requirement the air flow rate volume can also be adjusted for making patient feel more comfortable with their mouth.
- After use, press the power switch to the “off position. Disconnect the plug from power socket. Put down the drainage tube and drain off water in the water trough.
- Unclamp the medication cup unit to remove the cover and the cup as well as the other parts for cleaning. After cleaning. install the pieces in the correct position of the instrument and be ready for the next use.
Reviews
There are no reviews yet.