Description
iPAD SP1 and SP2 Disposable Li-ion Battery
The battery pack is an essential cog in the defibrillator machine. Without an adequate power supply, a defibrillator is unable to provide life saving treatment after a person has suffered a cardiac arrest, so it is essential to ensure that your battery is always working.
The battery has a 5 year lifespan, and when the unit is in standby mode and at operable temperatures, will carry out daily, weekly and monthly self tests to ensure that it is always rescue ready.
Battery features
- For use exclusively with the I-PAD SP1 defibrillator
- Battery provides a minimum of 200 shocks (150 joules)
- 5 year lifespan
- Simple click and replace procedure to install new battery
How to use
After the battery pack has been clipped to the back of the defibrillator and the unit is set to the standby mode, it will begin to regularly check the device to ensure that the AED is always rescue ready at all times.
The defibrillator will check the subsystems, hardware, software and the electrode pads to ensure that all the essential pieces of the unit are working correctly. This gives the user peace of mind that the defibrillator can be left unattended for long periods and still be ready to help save a life when the time comes.
![IPAD CU-SP2 CU-SP2 Package CU-SP2 Electrode Description This device is a semi-automated external defibrillator that can be administered on sudden cardiac arrest (SCA) patients. CU-SP2 is an easy-to-use Semi-Automated External Defibrillator (AED) that is small, light, and portable, and uses a battery. The AED automatically or manually reads the sudden cardiac arrest (SCA) patient’s electrocardiogram (ECG) and determines if a cardiac arrest that requires defibrillation has occurred, so that licensed emergency medical technicians, medical professionals and the general public can easily operate it. SCA can occur anytime to anyone at any place and may threaten the patient’s life if the appropriate CPR and/or electric shock with a defibrillator are not applied within a few minutes. Functions and Features Ambient noise detection [Auto volume adjusting] Easy-to-use & manage Electrode (Displaying Life expectancy of Electrode) Graphic LCD Status Indicator (Device, Pads & Battery) Selectable Voice guide for both Lay Rescuer and Healthcare Provider ECG monitoring or multi-printing via Bluetooth communication Product Exterior Dimension: 260 x 256 x 70 mm (Width x Length x Height) LCD: 5inch wide, 480×272 16bit Weight 2.4? (Including the battery pack and pads). Defibrillator Operation Type: Dual Mode (semi-automated, manual) External Defibrillator Output Type: E-Cube Biphasic (Truncated exponential type) Output Energy AED Mode: 150J±4J, 200J±6J at 50? load for adults, 50J±2J at 50? load for children Manual Mode (Optional): 2J±1J, 3J±1J, 5J±1J, 7J±1J, 10J±1J, 20J±2J, 30J±2J, 50J±2J, 70J±2J, 100J±4J, 150J±4J, 200J±6J at 50? load. Self-Diagnostic Test Auto Power Self-Test / Real-time Self-Test Daily / Weekly / Monthly Self-Test Manual Battery Pack Self-Test (performed when the user inserts the battery pack) ECG Analysis System Analyzes whether the rhythms of the patient’s impedance and ECG require a defibrillation Measured Impedance Range 25? ~ 175? Battery Battery Type: 12V DC, 111.1V DC, 1.9Ah Li-ion, Rechargeable Capacity: For fully charged new batteries, at least 60 shocks or 3 hours of operation at 25°C (77°F) Standby Life (After Inserting the Battery): If stored and managed in accordance with instructions in the document: At least 2 years from the date of installation into the i-PAD CU-SP2 . Temperature Ranges for Storage and Use Operating Environment: 0°C ~ 43°C (32°F ~ 109°F) Storage Environment: Temperature: -20°C ~ 60°C (-4°F ~ 140°F). Electrode Adult Electrode Area: 110 cm2 Cable Length: Total 120cm (Internal: 95cm, External: 25cm) Pediatric Electrode Area: 50 cm2 Cable Length: Total 120cm (Internal: 80cm, External: 40cm) Data Storage and Transfer Data Storage: Saves 3 events on the internal memory (up to 17 hours per event) SD Card: Stores the ECG and event data from the device’s internal memory through the PC software (CU-Expert) Bluetooth: Uses Bluetooth to communicate with the Printer or the CUEM1 (ECG transmission device) Standard Package Device(1), Adult Pads(1), Rechargeable Battery (1), Battery Charge Dock(1), CU-EM1(1), Printer(1), Printer Paper(10), SD Card(1), CU-Expert (1), Carrying Case(1), User’s Manual(1) Optional Accessories Pediatric pads(1), Disposable battery(1), IrDA Adapter(1)](https://www.oxyaider.co.za/wp-content/uploads/2022/02/AED-Cusp2–-Oxyaider-2-300x225.png)
Reviews
There are no reviews yet.